Light 4-Point Glass Canopy Kit

This Glass Canopy Light Kit is a 4 point standard canopy, simple and quick to install. This system is made of tension rods, bottom brackets, top brackets and glass brackets with an angle adjustable stem for use within a glass door canopy system.

The glass canopy light is a glass over door canopy for front door or small porch shelters. The canopy glass can be installed with a slight decline to allow rain water to run off the leading edge of the glass, or with a slight incline for rain water to run back towards the building if a guttering system is to be used instead.

Included in the kit is:

2 x Glass to wall bottom brackets, 2 x Wall to rod top brackets, 2 x Glass to rod brackets, 2 x Tension rods.

Maximum glass dimensions are 1500mm wide by 1050mm deep and with a maximum glass thickness of 13.5mm.

Material: 316 Grade Stainless Steel (Suitable for outdoor use).

This kit is designed for ease of use and speedy installation, the angle of the glass is pre-determined by the positioning of the holes through the glass and the wall brackets with minor adjustment after the glass is installed for fine tuning, the rods are not designed to be cut down or manipulated.

Please note: This kit does not include glass panels.