Woodworking Tools
Filter
Faithfull - Beech Bench Hook 250mm x 130mm
This Faithfull bench hook is manufactured from solid beech with screwed end hook blocks for extra strength. It will support timber safely on the work bench while sawing across the grain, helping to make sawing more accurate and safe. The bench hook has a reversible design that permits both left and right handed working. Size: 250 x 130mm (10 x 5in).
£18.24 inc VAT
Faithfull - Bevel Edge Butt Chisel Set, 4 Piece
Faithfull Short Blade Butt Chisels are ideal for precise cutting and paring of joints, or for use where access is limited. These chisels feature 110mm long drop-forged chrome vanadium steel blades with accurately ground bevels. Virtually unbreakable soft grip polypropylene handles with steel striking caps. The short length bevel edge blade is ideal for cutting into tight corners. This set contains...
£28.58 inc VAT
Faithfull - Curved Gouge Carving Chisel 12.7mm (1/2in)
These Faithfull Woodcarving chisels have wooden handles, deep seated tangs, steel ferrules and fully polished blades. Please Note: Woodcarving chisels will require final sharpening prior to their first use. The FAIWCARV11 Woodcarving chisel has the following specifications: Type: Curved Carving Gouge. Blade Width: 12.7 mm (1/2in). Handle: Hardwood. Curved gouges are used in place of a straight gouge...
£6.26 inc VAT
Faithfull - Dowel Drill Stops 6, 8 & 10mm
These Faithfull Dowel Drill Stops clamp on to drill bits enabling a hole of the correct depth to be made. Specifications: Pack of 3 drill stops - 6, 8, and 10mm. A 2.5mm hex key is required to fit the drill stops (not included).
£2.18 inc VAT
Faithfull - Dowelling Jig
The Faithfull Quick Dowelling Jig is designed to produce quick, easy and accurate dowel joints in most types of wood and many man-made boards. The jig can be used with 6, 8 or 10mm dowels to create Corner, ‘T’ and Mitre joints. They may be used with most types of power drills.The set includes a dowelling jig, angle piece, and full instructions on how to create professional joints. •...
£12.44 inc VAT
Faithfull - No.60 1/2 Block Plane in a Wooden Box
The Faithfull 60.1/2 Block plane with the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all...
£37.25 inc VAT
Faithfull - Scratch Awl 165mm (6.1/2in)
The Faithfull Scratch Awl is used for scribing, aligning and punching holes in leather, canvas, wood and soft alloys etc. It has a hardwood handle that is ergonomically shaped for a comfortable grip. The steel blade continues through the handle and is secured to a steel top cap. Blade Length: 92mm (3.1/2in)Overall Length: 165mm (6.1/2in)
£7.04 inc VAT
STANLEY - 105 Hand Drill
This Stanley single pinion hand drill had a 3-jaw chuck for greater versatility. It has an aluminium gear wheel which is long lasting, strong, and lightweight. It has a mandrel with three 8mm diameter bits. Made of precision die cast for strength and durability.Specification: Length: 265mm.
£25.45 inc VAT
STANLEY - 5002 Bevel Edge Chisel & Oilstone Set, 6 Piece
Stanley Bevel Edge Chisel Set designed for tradesmen. Ground finished, hardened and tempered alloy steel blade. The blade is lacquered for rust prevention. Fitted with a solid one-piece, impact-resistant, blue polypropylene handle. Supplied in a carry case with a sharpening stone and oil. Sizes: 6, 12, 18 and 25mm.
£39.53 inc VAT
STANLEY - DYNAGRIP Bevel Edge Chisel with Strike Cap Set, 5 Piece
Set of 5 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 6mm (1/4in)1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)1 x DYNAGRIP™ Bevel Edge Chisel 32mm (1.1/4in)
£48.47 inc VAT
STANLEY - FatMax Wrecking Knife 25mm
The Stanley FatMax® Wrecking Knife has a 4mm, double-edged blade, that is ideal for demolishing, leveraging and splitting. Fitted with a rubber coated ergonomic grip for greater safety and leverage. The striking cap allows the knife to be hit with a hammer, speeding up work progress. Blade Width: 25mm
£18.96 inc VAT
STANLEY - Iron for 9.1/2G & 220G Planes
To fit 112020 and 112220 Planes 9. 1/2G and 220G. (old style) Cutter Size. 1.5/8in
£11.33 inc VAT
STANLEY - Metal Body Surform Flat Block Plane
The Stanley Surform® Flat Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The metal body gives strength and durability and a thumb screw provides a quick blade release. It is supplied fitted with a 140mm (5.1/2in) fine cut blade. Overall Length: 155mm (6in).
£13.61 inc VAT
STANLEY - Metal Body Surform Plane
The Stanley Surform® Plane is for use on all types of wood, aluminium, copper, plastic and laminates. It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade. Overall Length: 315mm (12in).
£21.19 inc VAT
STANLEY - Surform Replacement Blade
1 x Stanley Surform® Blade Metal & Plastic 250mm (10in)
from £4.13 inc VAT