DuraPost® Aluminium Gate Frame - Sepia Brown

The DuraPost® Gate Frame gives you the flexibility to build a gate to your individual taste by following 3 easy steps: Step One: Aluminium Gate Frame Select your preferred colour of gate frame from Anthracite Grey, Olive Grey, Black or Sepia Brown. Step Two: Infill/Panel Select your preferred material to infill the gate. We recommend using our DuraPost® composite infill panels (purchased separately) in the same or contrasting colour for a full composite maintenance free look, or infilled with a custom timber match fence of your choice. DuraPost® infill pack can be purchased alongside the gate frame. Step Three: Adjust to Size The maximum width is 1.188m, and can be reduced by cutting the top and bottom cross-rail down to the desired size with a chop-saw that has a new sharp metal-cutting blade. The maximum height is 1.770m, and can be reduced in increments of 150mm down to a minimum of 1.32m. Step Four: Select your Gate Hardware Kit Our Kit comprises of: Hinges: 2 x 165mm x 60mm made from Grade 304 3mm stainless steel lift off hinge. With no visible fixings when closed and anti-theft orientation, they are safe and secure. Gate handle: 72mm narrow style back plate handle made from high-quality stainless steel. With a cylinder that can be keyed to your house key. Lock: 72mm centre, 60mm back set lock. Corner bracket: The corner brackets are an integral part of the DuraPost® Aluminium Gate, providing a rigid structure and a solid steel fixing point for the corners. Steel Packer: Steel core ensures that corners remain square and provides a very strong point for hinges to be fixed/hang. Plastic Packer: The steel packer and the plastic packer work together with the steel corner bracket to provide accurate fixing points. Gate Hardware can be purchased alongside the gate frame. Material: Made from powder-coated aluminium which means no rusting or painting required. Constructed from EN/AW 600-grade aluminium, this gate is strong and secure. Lock & hinge set are constructed from grade 304, 3mm thick stainless steel. The anti-theft design orients the hinges in such a way that the gate cannot be removed when closed. Lock: DIN standard lock, to BS/EN 12209 with a 72mm centre, and 60mm back set. A cylinder is also supplied, made in the UK to BS/EN 1303:2005. The catch direction can be easily switched simply by pulling out the catch and twisting. Designed to be made-to-measure on site.